Racking

IMG-20201118-WA0041

Mezzanine

Mezzanine shelving system is to build a loft in the middle of an existing workplace or shelf, to increase the storage space, do two, three attic, should access some light bulbs and small pieces of cargo suitable for multi-species or varieties of large quantities of small quantities of goods, manual acccess to the goods. Goods usually consists of forklifts, hydraulic lifts or freight elevator to the second floor, third floor, and then sent to a location by a car or light truck hydraulic pallet trucks

Narrow aisle racking

Shelf system subject to beam shelves system, except that the installation of the “three stacking forklift” action guide on the shelf at the bottom of the ground. Conventional rail using unequal angle. Material Handling forklift limit was dedicated “three stacking forklift.” Three stacking forklift established glide along the rail. Aisle width slightly greater than the width of the shelf system pallet goods, high-density storage requirements can be achieved

IMG-20201118-WA0050
IMG-20201118-WA0024

Heavy duty rack

Column: It is made up of two columns, cross broces and diagonal braces with nylon self-locking bolts. the comnined structure effectivly prevents the shelf from being unstable after the bolts are loosened. The column has double rows of diamond holes, and the hole pitch is 75mm. Therefore, the beam can be attached to the column and can be adjusted up and down by 75mm. the section of the column is composed of 11-13 faces, with large inertia distance, strong bearing capacity and strong impact resistancer

DRIVE-IN RACKING

Access through shelves of goods from the shelves and out of the same side, and follow the “first access principles.” Balance weight and can easily reach truck into the middle shelf corridor access to good. Rack Corridor due to the larger storage density, so the overall investment costs are relatively bottoom, less suitable for the type, quantity and goods more accessible mode can be scheduled, the same type used to store a large number of goods.

drive in rack
IMG-20201118-WA0041

Moulder racking

Mold, also known as mold rack shelf or drawer shelves, mainly to store all kinds of mold items, divided into light and heavy mold mold shelves shelf load capacity requirements based on layer. Top shelf can be configured to move the hoist car to facilitate lifting the mold

Carton flow racking

Fluent shelves, also known as sliding shelves, use roller aluminum alloys, sheet metal and other fluent strips, using the weight of the cargo rack, from one side of the stock, the other side of the channel to achieve first-in-first-out, easy to store,and a supplement The goods were picked up several times.

IMG-20201118-WA0041